English
Chinese
Spanish
English
German
Japanese

Backup-Power

Contact Us Today

H&V Battery Separator Brands

Batteries used in standby power applications such as UPS and Telecom operate in exacting partial state of charge (PSOC) conditions over long periods of time.  Hi-Sep glass fiber separators help extend battery life due to inherent advantages of high resistance to electro-chemical oxidation, high volume porosity, and a complete absence of oil leachants.  Standby power separtor options in the Hi-Sep separator family come with glass mat and rib variants or a combination of both which can be configured to suit performance requirements and customer preferences.

  • Hi-Sep separators offer 50% higher oxidation resistance and are 100% absense of oil leachants. 
  • Separators can be produced in leaf (Hi-Sep), sleeve (Hi-Sep PG), or roll form.

Our separator features include:

  • High electro-chemical oxidative resistance
  • High volume porosity of 72%
  • Absence of oil leachants
  • Low electrical resistance resulting in quick charge acceptance
  • Better recovery from deep discharge cycles
  • Variety of thicknesses and materials to suit battery design requirements - rib, glass mat or both
  • Sleeve variants come with an extra layer to provide protection during assembly

Hi-Sep battery separtors offer wide flexibility to battery manufactures in designing the battery to meet specific end performance requirements.  With the combination of high resistance to electro-chemical oxidation and the absence of oil leachants our separators are ideally suited for high temperature, continuous cycling usage and unstable grid power supply conditions.

Sleeve Leaf Roll
Inverter Flat Plate Battery
Inverter Tubular Battery
Telecom Tubular Gel Battery

Inverter Flat Plate Battery (60 - 180 Ah battery capacity)

Grade
Separator
Form
Base
Thick
(mm)
Glass
Tissue
Thickness
(mm)
Rib
Thickness
(mm)
Electrical
Resistance
(Ohm-Cm2)
Electrochem
Oxidation
Separator
Life
(Hours)
BHSS200LG Leaf 0.70 0.70 - 0.90 0.60 .07 800

Inverter Tubular Battery (60 - 200 Ah battery capacity)

Grade
Separator
Form
Base
Thick
(mm)
Glass
Tissue
Thickness
(mm)
Rib
Thickness
(mm)
Electrical
Resistance
(Ohm-Cm2)
Electrochem
Oxidation
Separator
Life
(Hours)
BHSP140SR-BHSP140RR Sleeve/Roll 0.45 - 0.80 - 1.10 0.130 800
BHSS200LGR Leaf 0.70 0.70 - 0.90 0.60 .07 800

Telecom Tubular Gel Battery (200 - 2000 Ah battery capacity)

Grade
Separator
Form
Base
Thick
(mm)
Glass
Tissue
Thickness
(mm)
Rib
Thickness
(mm)
Electrical
Resistance
(Ohm-Cm2)
Electrochem
Oxidation
Separator
Life
(Hours)
BHSS200LR Leaf 0.70 - 1.2 & above on each side 0.130 1000