 |
DESCRIPTION: N4220 is a blend of reinforcing materials and nitrile
latex, produced by the wet process, which yields a homogeneous gasketing
material. N4220 is recommended for general purpose soft gasket applications
in oil, fuel and cooling systems as well as intake manifold applications.
|
RECOMMENDED APPLICATION:
|
Soft Gasket Applications
|
|
TEMPERATURE RATING - FLUID:
|
390° F
|
200° C
|
|
TEMPERATURE RATING - EXHAUST:
|
910° F
|
488° C
|
|
AVAILABLE CALIPERS (in.) & (mm)
|
.016" / .032" / .047" / .062"
|
.4mm / .8mm / 1.2mm / 1.6mm
|
|
PHYSICAL TEST ORIGINAL PROPERTIES
|
TYPICAL VALUES **
|
TEST METHOD
|
PHYSICAL TEST ORIGINAL PROPERTIES
|
TYPICAL VALUES
|
|
density lbs./ ft. cu.
|
80
|
ASTM F-104
|
density g/cm cu.
|
1.36
|
|
tensile psi
|
800
|
ASTM F-152
|
tensile MPa
|
5.5
|
|
Compression @ 5000 psi
|
32%
|
ASTM F-36
|
Compression @ 34.5 MPa
|
32%
|
|
recovery
|
23%
|
ASTM F-36
|
recovery
|
23%
|
|
Creep Relaxation
22 HOURS @ 212° F
|
34%
|
ASTM F-38
|
Creep Relaxation
22 HOURS @ 100° C
|
34%
|
|
FLUID IMMERSIONS
|
TYPICAL VALUES
|
TEST METHOD
|
FLUID IMMERSIONS
|
TYPICAL VALUES
|
|
ASTM FUEL B,
5 hours @ 73° F
|
|
ASTM F-146
|
ASTM FUEL B,
5 hours @ 23° C
|
|
|
weight increase
|
24%
|
|
weight increase
|
24%
|
|
thickness increase
|
3.2%
|
|
thickness increase
|
3.2%
|
|
ASTM Oil # 3
5 hours @ 300° F
|
|
ASTM F-146
|
ASTM Oil # 3
5 hours @ 150° C
|
|
|
thickness increase
|
3.8%
|
|
thickness increase
|
3.8%
|
|
weight increase
|
32%
|
|
weight increase
|
32%
|
|
COOLANT,
5 hours @ 180° F
|
|
ASTM F-146
|
COOLANT,
5 hours @ 82° C
|
|
|
weight increase
|
41%
|
|
weight increase
|
41%
|
|
thickness increase
|
7%
|
|
thickness increase
|
7%
|
The performance data contained herein are based on laboratory tests
and represent typical values. This technical data sheet is not intended
to be used as a purchase specification. The information contained
in this document is proprietary and may NOT be reproduced in any
form without the written permission of HOLLINGSWORTH & VOSE
Company.
** PRELIMINARY SPECIFICATIONS MAY VARY SLIGHTLY FROM NORMAL PRODUCTION
VALUES.
top
|
