English
Chinese
Spanish
English
German
Japanese

Motive Power

Contact Us Today

H&V Battery Separator Brands

Batteries for motive power applications such as forklifts, manlifts, and electric vehilcles operate in demanding partial state of charge conditions over a long working life.  For batteries to meet these demands seperators are needed with high porosity, low electrical resistance, high electro-chemical oxidation resistance, and quick electrolyte absorption characteristics.  Hi-Sep meets these requirements and has the added advantage of being able to operate at elevated temperatures without any significant change in performance.  Hi-Sep motive power separators are available to suit your requirements in configurations with glass mat, ribs, or both.  

  • Hi-Sep battery separators have 20% higher porosity, 50% higher oxidation resistance, and 10% lower electrical resistance than competitive separators.
  • Available in leaf (Hi-Sep) and sleeve (Hi-Sep PG) form or in roll form for sleeving.  Rib thickness is designed to suit specific customer requirements.
  • Better deep discharge recoverability.

 

Internal tests have shown batteries with Hi-Sep separators exhibit much better deep discharge recoverability.  Hi-Sep also helps extend battery life due to high resistance to electro-chemical oxidation.

  • High electro-chemical oxidation resistance
  • High volume porosity of 72%
  • Absence of oil leachants
  • Low electrical resistance resulting in quick charge acceptance
  • Better deep discharge recoverability
  • Supplied in a variety of combinations including ribs, glass mat, or both to suit battery requirements

Hi-Sep battery separators for motive power applications offer flexibility to battery manufacturers in designing the battery to meet specific end performance requirements. 

Leaf Envelope Roll-Sleeve
Flat Plate Battery
Tubular Battery

Flat Plate Battery (N60 - N180 Ah battery capacity)

Grade
Separator
Form
Base
Thick
(mm)
Glass
Tissue
Thickness
(mm)
Rib
Thickness
(mm)
Electrical
Resistance
(Ohm-Cm2)
Electrochem
Oxidation
Separator
Life
(Hours)
BHSS165LG Leaf 0.55 0.40 - 0.90 none 0.050 800
BHSS165LGR Leaf 0.55 0.70 - 0.90 0.60 0.095 - 0.140 800

Tubular Battery (60 - 200 Ah battery capacity)

Grade
Separator
Form
Base
Thick
(mm)
Glass
Tissue
Thickness
(mm)
Rib
Thickness
(mm)
Electrical
Resistance
(Ohm-Cm2)
Electrochem
Oxidation
Separator
Life
(Hours)
BHSP140SR-BHSP140RR Roll/Sleeve 0.45 none 0.80 - 1.10 0.130 800
BHSS200LG Leaf 0.70 0.40 0.70-1.40 0.130 800